Iosafe-Australia

Starting with RAIDiator 3.01, there is comprehensive memory test that you can run on the ioSafe R4. To invoke it, power-down the ioSafe R4 and depress the front power button, until you see all disk LEDs blink together for the 5th time (ignore the quick flash at the beginning). Disks will blink for about a second at about the 5-, 10-, 15-, 20-, and 25-sec mark. Release at that point. The first disk LED will come on to signify the first of an 8-stage memory test. The LED sequence for the 8 stages will be in binary format going from left to right. When all disk LEDs are lit, the memory is good. If the first and second LED blink, followed by the 3rd and 4th LEDs, in alternating pattern, the memory is bad.

Please keep in mind that the success rate for flagging an actual bad memory is about 85%, so we do recommend that you run this test twice.